cement factories in uae

JK PlastMaxX – Cement plaster/Render – Light PP22

Product Info

JK PlastMaxX – CEMENT PLASTER/RENDER – LIGHT PP22 is a premium dry-mix plaster suited for highly absorbent substrates like Autoclaved Aerated Concrete (AAC) blocks, Calcium Silicate Blocks, properly prepared concretes, etc. It can be applied by spray plaster machines and manual application and is suitable for interior and exteriors.


High Quality Portland Cement, Hydrated Lime, carefully selected processed natural mineral aggregates and very special chemical additives for performance enhancements.


  • Best suited for AAC and Light Weight Blocks
  • Quality Consistency
  • Excellent Workability
  • Outstanding bonding tendency with optimum mechanical properties

Technical Characteristics

  • Binder: High Performance Portland Cement
  • Aggregate Size: 0 – 2 mm
  • Appearance: Grey Granular Powder
  • Mixing Ratio: 8.5 Liters water per 50 Kg bags
  • Water Requirement: 17%
  • Coverage: 42 Square Meters/Metric Ton @ 15 mm thickness (actual coverage depends on application temperature, nature of substrates, applied thickness, transfer efficiency, etc.)
  • Density: 1.78 Kg/Liter (Wet); 1.65 Kg/Liter (Dry)
  • Compressive Strength: Minimum 2.5 N/mm² (at 28 days)
  • Flexural Strength: Minimum 1 N/mm² (at 28 days)
  • Curing: 48 Hours by clean water


BS EN 998-1: 2016|BS EN: 13914-1: 2016 | BS EN: 13914-2: 2016 | BS 5262|BS 5492 | ASTM C348 | ASTM C349 | ASTM C926 | ASTM C897

cement plaster