Product Info
JK CEMENT PLASTMAXX PP33 is a premium dry-mix plaster suitable for high strength requiring applications. It is specially formulated for plastering work that require high tensile strength and provide smooth and an elegant finish coat in single coat system. It can be applied in mono-coat or bi-coat system by suitable plaster machines or by hand and is designed for interiors and and recommended for plastering on block walls, ceilings, columns, bricks and properly prepared concrete surfaces.
Composition
High Quality Portland Cement, carefully selected processed natural mineral sand, special chemical additives including re-dispersible polymer powder and polypropylene fiber for performance enhancements.
Features
- High Compressive and Flexural Strength
- High tensile strength and tensile adhesion strength
- Quality Consistency
- Excellent Workability
- Outstanding bonding tendency
Technical Characteristics
- Binder: High Performance Portland Cement
- Aggregate Size: 0 – 2 mm
- Appearance: Grey Granular Powder
- Mixing Ratio: 8.5 – 9.0 Liters water per 50 Kg bags
- Water Requirement: 17-18%
- Coverage: 42 Square Meters/Metric Ton @ 15 mm thickness (actual coverage depends on application temperature, nature of substrates, applied thickness, transfer efficiency, etc.)
- Density (Kg/Lt): 1.70 ± 0.20 (Wet); 1.60 ± 0.20 (Dry)
- Compressive Strength: Minimum 8 N/mm² (at 28 days)
- Flexural Strength: Minimum 2 N/mm² (at 28 days)
- Tensile Strength: Minimum 0.65 N/mm² (at 28 days)
- Curing: 48 Hours by clean water
Specifications
BS EN 998-1: 2016|BS EN: 13914-1: 2016|BS EN: 13914-2: 2016|BS 5262|BS 5492|ASTM C109|ASTM C926|EN 1015-12 and ASTM C897